Automation Studio™ Service Release
Take full advantage of Automation Studio™ capabilities by downloading the latest service releases.
Users under the Annual Maintenance & Technical Support Plan will automatically receive the service releases via email.
Please note: Before installing the 32 or 64-bit version, please verify your computer’s compatibility by using this
In order to download the latest Automation Studio™ release P6, your computer must meet the following minimum requirements:
Automation Studio™:
- Windows XP, Vista, Windows 7 or 8 (32-bit and 64-bit) Professional Edition
- Intel Core 2 Duo 1.83 GHz or equivalent. (Intel Core i7 recommended)
- Graphic Card:
- Video memory 512 MB and up (recommended)
- Screen resolution of 1024 x 768 (minimum)
- 10 GB of available hard-disk space
- For Automation Studio™ 32-bit:
- RAM: 3 GB
- Microsoft Office (not required, but if present must be 32-bit)
- For Automation Studio™ 64-bit:
- RAM: 8 GB (recommended)
- Microsoft Office (not required, but if present must be 64-bit)
- Operating System must be 64-bit
Automation Studio™ Project Server:
- Windows XP, Vista, 7, 8, Server 2003, 2008, 2008 R2 or SERVER 2012 (32-bit and 64-bit) Professional Edition
- Intel Core 2 Duo 1.83 GHz or equivalent (Intel Core 2 Quad recommended)
- 3 GB RAM
- Graphic Card:
- Video memory 512 MB (recommended)
- Screen resolution of 1024 x 768 (minimum)
- 500 MB of available hard-disk space
- For Automation Studio™ Project Server 32-bit:
- Microsoft Office (not required, but if present must be 32-bit)
- For Automation Studio™ Project Server 64-bit:
- Microsoft Office (not required, but if present must be 64-bit)
- Operating System must be 64-bit
Network License Manager:
- Windows XP, Vista, 7, Server 2003, 2008 or 2008 R2 (32-bit or 64-bit) Professional Edition
- TCP/IP Protocol
- 100 MB of available hard-disk space
Please note that if your computer does not meet these requirements, then you may experience slow response times. Our recommendation would be to upgrade your computer in order to match the necessary prerequisites.
 |
For Automation Studio™ version 5.7 and up, updates and service releases will only be available through the technical support portal. Click here to download go to the technical support portal.
*Please note: support for Automation Studio v5.7 Pro will be discontinued at the end of December 2012* |
If you have any difficulties downloading the service release, please contact our technical support team at +1-514-748-8050, support@famictech.com or connect to our online technical support portal.
|
